JDS Uniphase WiFi Advisor User Manual page 47

3 Select Two-Ended Site Assessment.
The Settings page appears.
4 If needed, specify the settings as described in
5 Select Next... to initiate the Site Assessment test.
6 After the first location is tested, a green check mark or red "X" (a Go/No Go
result) appears next to the access point and station.
7 If you have another station, select Next Station Location. If not, go to
The other station must be another WiFi Advisor that is registered with the
App.
8 When finished testing, select Finish and Closeout. The Finish Test window
opens.
9 Enter the Customer Address. This appears in the closeout report.
10 To finish the closeout, save the results to a current job or a new job.
See"Managing jobs" on page 35
December 2014
WiFi Advisor Wireless LAN Analyzer User's Guide
22073751, Rev. 002
Assessing WiFi performance throughout a site
"Specifying
Chapter 3 Testing
settings".
step 8.
Page 31