Advertisement
Quick Links
Sand paper can be used to gently clean any joints.
A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due care and
remember to cut away from yourself at all times.
During the construction of this model, you may find it convenient to use pegs / elastic bands to hold pieces in place while
you allow glue to dry.
Remove the three pieces shown above from the
Take this long wall section.
Take these two walls.
Take these three pieces
28mm Middle Eastern Building #9
B28-ME-009
Please read these instructions fully before starting construction.
PVA or equivalent glue will be required to stick sections together.
sprue.
Glue them together as shown above.
And glue it to the first set of walls.
Glue them together as shown.
And glue them together.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for BLOTZ B28-ME-009
Summary of Contents for BLOTZ B28-ME-009
- Page 1 28mm Middle Eastern Building #9 B28-ME-009 Please read these instructions fully before starting construction. PVA or equivalent glue will be required to stick sections together. Sand paper can be used to gently clean any joints. A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due care and remember to cut away from yourself at all times.
- Page 2 Take these two pieces Glue them together. You should now have the four sub-assemblies shown Attach the walls to the base pieces. above. Attach the two left-hand side sub-assembles together, then add the right-hand one. Finally add the top one. Take the roof supports as shown above.
- Page 3 Place (do not glue) the roof sections into position, The completed building. then glue the trapdoors to them.
Need help?
Do you have a question about the B28-ME-009 and is the answer not in the manual?
Questions and answers