Subscribe to Our Youtube Channel
Related Manuals for BLOTZ 28mm Old West Store 4
Summary of Contents for BLOTZ 28mm Old West Store 4
- Page 1 28mm Old West Store #4 B28-OW-111 Assembly Instructions Designed and made in the UK. This is a model kit and is not intended for persons under 14 years old. Requires assembly. Supplied unpainted.
- Page 2 28mm Old West Front #2 B28-OW-401 Please read these instructions fully before starting construction. PVA or equivalent glue will be required to stick sections together. Sand paper can be used to gently clean any joints. A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due care and remember to cut away from yourself at all times.
- Page 3 Place the lower lug of the door into the lower support, Apply some glue to the upper support and then slide then sit the upper support onto the top lug before it completely into position. gently easing it into place (see example pic). The windows and sills.
- Page 4 28mm Old West Short Rear #1 B28-OW-550 Please read these instructions fully before starting construction. PVA or equivalent glue will be required to stick sections together. Sand paper can be used to gently clean any joints. A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due care and remember to cut away from yourself at all times.
- Page 5 Glue the side inserts into place. Take the door and supports from the sprue. Glue the lower support into place. Allow to dry. Place the lower lug of the door into the lower support, then sit the upper support onto the top lug before gently easing it into place (see pic).
- Page 6 28mm Short Roof #1 B28-OW-630 Please read these instructions fully before starting construction. PVA or equivalent glue will be required to stick sections together. Sand paper can be used to gently clean any joints. A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due care and remember to cut away from yourself at all times.
- Page 7 Glue the roof strips into position.
Need help?
Do you have a question about the 28mm Old West Store 4 and is the answer not in the manual?
Questions and answers