Packing Condition (Incoming Serial Data Packing Condition); Ethernet Data Tagging Option - Wiznet WIZ630wi User Manual

6.3 Packing Condition

Packing Condition (Incoming serial data packing condition)

Packing Condition Packing Condition
Type Type Type Type
Time Time
Time Time
Size Size
Size Size
Character Character
Character Character
Inactivity Time: Inactivity Time:
Inactivity Time: Inactivity Time:
H/W CMD switch H/W CMD switch H/W CMD switch H/W CMD switch

6.4 Ethernet Data Tagging Option

6.4 6.4 6.4 Ethernet Data Tagging Option Ethernet Data Tagging Option Ethernet Data Tagging Option
This option is used to help serial device to identify who is the received serial data's source: the received
serial data comes from Main Port or Aux Port.
Type Type Type Type
Status Status Status Status
Main Port Main Port
Main Port Main Port
Aux Port Aux Port Aux Port Aux Port
© Copyright 2012 WIZnet Co., Inc. All rights reserved.
(Incoming serial data packing condition)
(Incoming serial data packing condition) (Incoming serial data packing condition)
Data packing until the set time and then sent to server after the set time.
Data packing until the set size and then sent to the server.
Data packing until the set character and then sent to the server.
TCP/IP connection is discontinued if there is neither serial data nor network
data during the set time.
-. Enable/Disable the H/W CMD switch pin.
-. H/W CMD switch pin is the switch for sending commands from CPU to
WIZ630wi.
Enable or disable this option (Checked : Enable, Un-Check : Disable)
Before sending data from Main port to serial port, WIZ630wi added a TAG in
the front of payload.
For example:
In-come LAN Data : "abcdegf"
Output data to Serial Port : "!MAIN!abcdegf"
Before sending data from Aux port to serial port, WIZ630wi added a TAG in the
front of payload.
For example:
In-come LAN Data : "abcdegf"
Output data to Serial Port : "!AUX!abcdegf"
Description Description Description Description
Description Description Description Description
35