Table of Contents
Advertisement
13. To prepare and install the right-hand footwell trim
19
30
30
31
30
32
31
30
Retrofit / Installation kit No. 84 64 0 025 810, 84 64 0 026 614
Installation instructions No. 01 29 0 025 833
F 38 0200 B
22
32
F 38 0203 B
30
31
21
F 38 0201 B
20
F 38 0202 B
Affix the spacer sleeves (19) to the right-hand
footwell trim (30) using double-sided adhesive
tape.
If the right-hand footwell trim (30) is fitted with a
footwell light (31) or the preparation (32) for
installing a footwell light, the damping strip (22)
must be affixed over this as shown in the figure.
Place a speed nut M5 (21) on the relay holder on
the left in the direction indicated by the arrow.
Place another speed nut M5 (21) on the air duct
(31) on the control module box on the right in the
direction indicated by the arrow.
Secure the right-hand footwell trim (30) with the
two hexagonal screws and washers M5 x 30 (20)
through the affixed spacer sleeves to the
inserted speed nuts.The two plastic expanding
rivets with which the right-hand footwell trim (30)
was originally secured are no longer required.
Then clip the right-hand footwell trim (30) to the
heating duct (31) and secure it with the self-
tapping screw (32).
Issue date: 07 .2000
GB/43
Advertisement
Table of Contents
