Table of Contents
Advertisement
6. Installation and wiring diagram
(for cars without SA 640 telephone preparation only)
The adapter wiring harness A and the mobile phone holder connection cable C are to be
installed as shown in the figure and secured with cable ties.
When installing the adapter wiring harness A, start with branches A1 and A2.
Branches A1 and A2 to the centre console on the right near the heating duct
Branches A3, A4 and A5 along the gearbox tunnel within the centre console to the
installation location of the hands-free facility control module behind the glove compartment
Branch C1 to the installation location of the hands-free facility control module behind the
glove compartment
Branch C2 to the footwell on the passenger side
Tie back any excess lengths.
Retrofit / Installation kit No. 84 64 0 025 810, 84 64 0 026 614
Installation instructions No. 01 29 0 025 833
A
A5 A4
A1
A2
Issue date: 07 .2000
A3
C1
C2
C
F 39 0179 B
GB/33
Advertisement
Table of Contents
