Table of Contents
Advertisement
8.
To install and connect the adapter cable in cars with SA 640 telephone preparation
31
D3
X4545B
D
A1
Retrofit / Installation kit No. 84 64 0 025 810, 84 64 0 026 614
Installation instructions No. 01 29 0 025 833
30
D3
F 38 0184 B
30
A2
B1
B
A
F 38 0206 B
Dismantle the black 18-pin socket casing
X4545B on the tied back telephone wiring
harness (30).
Connect branch D3, 1-pin blade terminal
contact, red/yellow cable on telephone adapter
cable D, to slot PIN 10 on the black 18-pin
socket casing X4545B.
If slot PIN 10 on the black 18-pin socket casing
X4545B is already occupied the existing blade
terminal contact (31) must be taken out of slot
PIN 10 on the black 18-pin socket casing
X4545B, the contact part cut off and the free
cable end insulated with a shrink hose (this is
no longer required).
Then assemble the black 18-pin socket casing
X4545B again.
Press the centre console (30) outwards a little
from the inside and thread branches A1, black
18-pin plug casing, A2, white 6-pin plug casing
on adapter wiring harness A and B1, coaxial
socket casing mini UHF on the aerial adapter
cable B, through it.
Issue date: 07 .2000
GB/36
Advertisement
Table of Contents
