To Install The Telephone Console (E36/2/3/4/C Only) - BMW 84 64 0 025 819 Parts And Accessories Installation Instructions

4. To install the telephone console (E36/2/3/4/C only)

c
19
19
24
a
21
25
Retrofit / Installation kit No. 84 64 0 025 819, 84 64 0 025 882, 84 64 0 025 883, 84 64 0 026 656, 84 64 0 026 657 , 84 64 0 026 658
Issue date: 07 .2000 Installation instructions No. 01 29 0 025 889
19
23
b
a
F 36 0152 M
24
20
F 36 0153 M
24
24a
F 36 0154 M
The precise position of the retaining clips
(dimensions d and e) has a major bearing on
how well the telephone console will fit on the
centre console.
Remove the Philips screws (c) from the top and
side mounting for the cover trim (b).
Place the speed nuts (23) on the retaining clips
(19).
Raise the cover trim (b) in the direction indicated
by the arrow and push the retaining clips (19)
between the cover trim (b) and the centre
console (a).
Dimension d = 30 mm
Dimension e = 95 mm
Fit the holder (24) on the centre console (a) using
the positioning lugs (see arrows) and secure it to
the retaining clips (19) with the self-tapping
screws ST3.9 x 19 (20).
After correctly installing the holder (24) on the
centre console, slide the telephone console (25)
into the guide rail (24a) and swing it upwards
until the holes (in the telephone console and
holder) line up.
Secure the telephone console (25) to the holder
(24) using self-tapping screws ST3.9 x 13 (21).
The resulting stressing will considerably
increase the load capacity and the stability of the
BMW telephone console on the centre
console.
EN/26