Regulatory Information; Industry Canada - Aruba 530 Series Installation Manual

Environmental
Operating:

Temperature: 0°C to +50°C (+32°F to +122°F)

Humidity: 5% to 93% non-condensing

Storage and transport:

Temperature: -40°C to +70°C (-40°F to +158°F)

Humidity: 5% to 93% non-condensing

!
For indoor use only. The access point, AC adapter, external antennas, and all connected cables are not to be
installed outdoors. This stationary device is intended for stationary use in partly temperature controlled
weather-protected environments (class 3.2 per ETSI 300 019).

Regulatory Information

For the purpose of identification needed for regulatory compliance certifications, this product has been assigned
a unique regulatory model number (RMN). The regulatory model number can be found on the product
nameplate label, along with all required approval markings and information. When requesting compliance
information for this product, always refer to this regulatory model number. The regulatory model number is not
the marketing name or model number of the product.
AP-535 RMN: APIN0535

AP-534 RMN: APIN0534

Aruba Networks provides a multi-language document that contains country-specific restrictions and additional
safety and regulatory information for all Aruba access points. This document can be viewed or downloaded at
www.arubanetworks.com.
Changes or modifications to this unit not expressly approved by the party responsible for regulatory compliance
could void the user's authority to operate this equipment.
!
Toute modification effectuée sur cet équipement sans l'autorisation expresse de la partie responsable de la
conformité est susceptible d'annuler son droit d'utilisation.
Brazil
Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência
em sistemas devidamente autorizados.

Industry Canada

This Class A digital apparatus meets all of the requirements of the Canadian Interference-Causing Equipment
Regulations.
In accordance with Industry Canada regulations, this radio transmitter and receiver may only be used with an
antenna, the maximum type and gain of which must be approved by Industry Canada. To reduce potential radio
interference, the type of antenna and its gain shall be chosen so that the equivalent isotropic radiated power
(EIRP) does not exceed the values necessary for effective communication.
This device complies with Industry Canada's license-exempt RSS regulations. Operation of this device is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation.
When operated in 5.15 to 5.25 GHz frequency range, this device is restricted to indoor use to reduce the
potential for harmful interference with co-channel Mobile Satellite Systems.
This radio transmitter model APIN0534 has been approved by Industry Canada to operate with the antenna
types listed in the online ordering guide (link provided below) with the maximum permissible gain indicated.
Antenna types not included in this list, having a greater gain than the maximum gain indicated for that type, are
strictly prohibited for use with this device.
Déclaration d'Industrie Canada
Cet appareil numérique de classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du
Canada.
Conformément aux réglementations d'Industrie Canada, cet émetteur et récepteur radio ne peut être utilisé
Aruba 530 Series Campus Access Points
www.arubanetworks.com/assets/og/OG_AP-530Series.pdf
| Installation Guide
9