Lanner NCA-4020 User Manual page 117

NCA-4020 User Manual
FRB-2 Timer
Policy Power Down
OS Watchdog
Timer
OS Wtd Timer
Timeout
OS Wtd Timer
Policy Power Down
System Event Log
BMC network
configuration
View System
Event Log
BMC Warm Reset
Do Nothing
Configure how the system should respond if the
Reset
FRB-2 Timer expires. Not available if FRB-2 Timer is
disabled.
Power Cycle
If enabled, it starts a BIOS timer which can only be
shut off by Management Software after the OS
Enabled
loads.
Disabled
successfully loaded or follows the OS Boot
Watchdog Timer policy.
5 minutes
Configure the length of the OS Boot Watchdog
10 minutes
Timer. Not available if OS Boot Watchdog Timer
15 minutes
is disabled.
20 minutes
Do Nothing
Configure how the system should respond if the
Reset
OS Boot Watchdog Timer expires. Not available if
OS Boot Watchdog Timer is disabled.
Power Cycle
Press <Enter> to change the SEL event log
NA
configuration.
NA Configure BMC network parameters.
Press <Enter> to view the System Event Log
NA
Records.
NA Press <Enter> to do Warm Reset BMC.
It also helps verify that the OS is
117