Other Functions; Auxiliary Displays - Leica CL Instruction Manual

EN
Notes
• Active bracketing is indicated by
the eff ect of the function on screen while the pictures are taken
(brighter or darker).
• Depending on the exposure mode chosen, graduations are
generated by changing the shutter speed (
aperture value ( ).
S
• The picture sequence: Underexposure/correct exposure/
overexposure
• The working range for automatic bracketing may be limited
depending on the available shutter speed/aperture combination.
• With automatic ISO sensitivity control enabled, the sensitivity
calculated by the camera automatically for the raw picture will
also be applied to all other pictures in a series, i.e. the ISO value
will not change during bracketing. This may mean that the
slowest shutter speed specifi ed under
exceeded.
• The focus range for automatic bracketing may be limited
(depending on the originally set shutter speed). The specifi ed
numbers of pictures will be taken regardless. Several pictures in
a series may consequently be taken with the same exposure
values.
• The function remains active until another function is selected in
the submenu or the camera is switched off and on
Drive Mode
again. If no other function is selected, another series of pictures
is taken each time the shutter button is pressed.
88
on screen. You can watch
/ / ) or the
P A M
is
Min. Shutter Speed

OTHER FUNCTIONS

AUXILIARY DISPLAYS

Four functions are available.
A
D
C
B
A
Histogram
B
Grid lines ( )
Grid Setup
C
Horizon display ( )
Horizon
D
Clipping
Note
• The grid display will always appear when activated, i.e.
independent of whether the information in the header and footer
are accessed (see p. 56). With header and footer deactivat-
ed, the level display, histogram and clipping displays will not
appear.