Base Topology Structure - Huawei SE2900 Hardware Description

HUAWEI SE2900 Session Border Controller
Hardware Description
Figure 1-23 CAN bus connections
Topology
The bus topology is used for CAN bus connections. The CAN bus works as follows:



1.5.2 Base Topology Structure

Functions
The Base plane serves as the management and control plane in the subrack. It provides
channels for loading software and transmitting alarms and maintenance information.
Figure 1-24
Figure 1-24 Base plane connections
Issue 01 (2016-01-15)
The MXUs are the management units, and the service boards are the managed units in
the subrack. The management and managed units communicate with each other.
Each board is connected to the CAN bus through two independent channels. If one
channel is unavailable, the other channel is used to ensure uninterrupted communication.
shows the Base plane connections.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Service Processing Device
31