Fbxwifi™ Communications - Emerson FB1100 Instruction Manual

Emerson FB1100 Flow Computer Instruction Manual
D301752X012
August 2020
Figure 1-3: HMI Module with LCD
Figure 1-4: HMI Module without LCD
Note
If your flow computer does not include the LCD option, you still have the status LEDs and a single IR
button for waking up the device (shown in
FBxWifi™ Communications
The flow computer has an optional Wi-Fi
laptop or tablet from some small distance away.
This capability allows an operator to potentially remain outside the hazardous location and still
communicate with the flow computer. The operator's laptop must have Wi-Fi capability, line-of-
sight access to the HMI module, and must be loaded with FBxConnect configuration software.
Once connected, the operator can view process values, edit configuration parameters, and collect
logs.
Note
The FBxWifi electronics reside inside the HMI module. The HMI module must be awake to use
FBxWifi communications You can wake it up manually by holding a finger against the front cover
glass over the Hold to Wake button (the left-most button) for typically from five to ten seconds.
8
Figure 1-4).
® transceiver (FBxWifi) that enables you to connect via a
Introduction