Flow Chart - Haug EN 8 SLC MT Operating Instructions Manual

6 Troubleshooting

6.2 Flow chart

The indicator lamp does not illuminate.
Switch off discharging power pack and
unplug ionizing units.
Disconnect signalling line from
discharging power pack and screw
jumper plug onto the signalling socket.
Switch on the discharging power pack.
Switch off discharging power pack and
connecting a ionizing unit.
Switch on the discharging power pack.
Switch off discharging power pack and
connecting another ionizing unit.
Switch on the discharging power pack.
16
Indicator lamp stays off?
no
Indicator lamp stays off?
no
Indicator lamp stays off?
no
Ionizing system is ok
yes
Discharging power
pack is faulty
This ionizing unit
has a fault.
yes
(Short circuit)
This ionizing unit
has a fault.
yes (Short circuit)