Enhanced Radius Function (Auto-R): Continued...
Navigate to the plane required and press
Enter the centre co-ordinates for the ARC and press
On 2-axes Mill the Z-axis entry
is made in to the Y-axis
Navigate to the ARC Radius entry and enter the required value and press.
Navigate to the ARC Start entry and enter the required value.
Navigate to the ARC end entry and enter the required value.
Navigate to the Tool Diameter entry and enter the required value.
key. The display will move to the ARC centre entry automatically.
2X.R
XZ
R
.
.
XZ ST PT
.
.
XZ END P
.
.
TOOL DIA
.
.
- 34 -
.
XZ
CENT
.
.
XZ
CENT
.
R
.
.
XZ ST PT
.
.
XZ END P
.
.
TOOL DIA
.