Table of Contents
Advertisement
Simple Radius Function (R-Function): Continued...
Enter the required ARC type with reference to the ARC Table.
Navigate to the Radius entry and enter the ARC Radius.
Use the Message
Navigation keys
Navigate to the Tool Diameter entry and enter the Tool Diameter. (This can be 0.000 if cutting with tool tip)
The following parameters may not appear on ALL plane selections / DRO types (2x / 3x).
Navigate to the Tool compensation entry and enter the Tool Cut edge.
Next set the MAX CUT value.
R
.
Tool dia
.
R - TOOL
R - TOOL
MAX CUT
.
The EM250 will use this as the maximum step value and automatically
calculate the best possible axis increment according to the curvature of
the ARC to be approximately equal to the MAX CUT value.
- 30 -
TYPE 1-8
R
.
Tool dia
.
R + TOOL
R + TOOL
MAX CUT
.
Advertisement
Table of Contents
