Table of Contents
Advertisement
Simple Radius Function (R-Function)
The EM250 R-Function operates on the work-to-zero principle for the machining an radius. This is the simplest
method for machining one of the eight most common arcs. For more complex arcs see the Auto-R Radius Function.
The common types of arc are shown below. The operation of the R-Function assumes the tool is located at the start
of the arc as depicted by
To best demonstrate these methods let us consider the part below as by way of example.
Set the Z-STEP to the required machining mode using the
Move the Tool to the start of the ARC. It is also possible to machine in the Z plane on a 2-axes XY DRO on Mills. To do
this we will need to use the Knee axis Z-dial for as a manual reference.
Enter the R-Function by pressing the
Navigate to the plane required and press
. These are all circular arcs with a user defined radius.
Position tool at the
start of the arc.
key. The key LED will be illuminated showing the function is now active.
.
ABS
.
.
key. The display will move to the ARC type entry automatically.
SIM.R
XZ
Parameter
Value
Plane of Operation
XZ
ARC Type (1-8)
2
Radius of ARC
200mm
Tool Diameter
6mm
key BEFORE entering the R-Function
- 29 -
X
Z
Y
When the tool has been
positioned at the start of
the ARC zero the Z-axis
dial (2-axis DRO Only)
SIM.R
XY
TYPE 1-8
Advertisement
Table of Contents
