Table of Contents
Advertisement
Selecting a Tool-Offset: (Continued...)
The desired Tool Offset can be selected using the Tool navigation keys or by typing the desired tool number in
directly using the numeric keypad.
.
IN TOOL
.
.
IN TOOL
.
All normal functions such as Axis Summing, axis preset etc. continue to operate in Tool Offset mode.
Example: Select Tool #5
Example: Move from Tool #5 to Tool #6
- 16 -
.
IN TOOL
.
There is no need to press the enter key as
we are in Tool use mode.
.
IN TOOL
.
Advertisement
Table of Contents
