Table of Contents
Advertisement
Enable SDM Mode
Method #1: Use the SDM navigation keys. Pressing these keys will automatically enable SDM mode.
.
ABS
.
Navigating to SDM #0 will disable SDM mode.
Method #2. Direct SDM selection
.
ABS
.
Disable SDM Mode
The SDM mode is automatically disabled if SDM #0 is selected.
However it is more common to simply re-press the [SDM] key, e.g.
SDM MODE
.
.
Example: Select SDM #2
Example: Select SDM #5
- 20 -
.
.
.
.
The values in the axis will reflect the current
offset-from zero for the selected datum.
Above is only an example.
.
.
SDM MODE
SDM MODE
ABS
Advertisement
Table of Contents
