Procedure For Entering Forced Engine Activation Mode - Hyundai KONA Owner's Manual

Maintenance
PROCEDURE FOR ENTERING FORCED ENGINE ACTIVATION
MODE
If the engine needs to be kept running
while the vehicle is stopped to inspect
emission gas or perform vehicle
maintenance, follow below procedure to
enter forced engine activation mode.
1. Place the shift lever in P (Park)
position with the vehicle stopped.
Engage the parking brake. Then,
follow the steps (1) to (5).
Below steps from (1) to (5) must be
completed within 60 sec. If not, the
process is reset and you must start
again from step (1).
(1) Turn the ignition switch to the ON
position. Vehicles equipped with the
smart key, press the Engine Start/
Stop button twice without depressing
the brake pedal.
(2) Place the shift lever in P (Park)
position and depress the accelerator
pedal twice.
(3) Place the shift lever in N (Neutral)
position and depress the accelerator
pedal twice.
(4) Place the shift lever in P (Park)
position and depress the accelerator
pedal twice.
(5) With the brake pedal depressed, start
the engine, and maintain idling state.
The engine remains in idle state and
the forced engine activation mode
is maintained even when the gear is
shifted to a different position.
8-80
2. " " indicator on the instrument
cluster blinks when the vehicle is in
forced engine activation mode. Check
the " " indicator blinking to ensure
that the forced engine activation
mode is correctly entered.
The " " indicator continues blinking
until the forced engine activation
mode is cancelled. When the mode is
cancelled the "
blinking.
3. To cancel the forced engine activation
mode, turn the vehicle off.
" indicator will stop