Blind-Spot Collision Warning (Bcw) System; System Description - Hyundai KONA Owner's Manual

BLIND-SPOT COLLISION WARNING (BCW) SYSTEM

(IF EQUIPPED)

System description

Blind-Spot Collision Warning (BCW)
The Blind-Spot Collision Warning System
(BCW) uses radar sensors in the rear
bumper to monitor and warn the driver
when it detects an approaching vehicle
in the driver's blind spot area.
1. Blind-Spot Area
The blind spot detection range varies
relative to vehicle speed.
Note that if your vehicle is traveling
much faster than the vehicles around
you, the warning will not occur.
2. Closing at high speed
The Lane Change Assist feature will
alert you when it detects a vehicle is
approaching in an adjacent lane at a high
rate of speed. If the driver activates the
turn signal when the system detects an
oncoming vehicle, the system sounds an
audible alert.
OOSH069049L
WARNING
• Always be aware of road conditions
while driving and be alert for
unexpected situations even though
the Blind-Spot Collision Warning
System is operating.
• The Blind-Spot Collision Warning
System (BCW) is supplemental
systems to assist you. Do not entirely
rely on the systems. Always pay
attention, while driving, for your
safety.
• The Blind-Spot Collision Warning
System (BCW) is not substitutes
for proper and safe driving. Always
drive safely and use caution when
changing lanes or backing up the
vehicle.
The Blind-Spot Collision Warning
System (BCW) may not detect every
object alongside the vehicle.
06
OOSH069050L
6-55