Download Print this page

Hyundai KONA Owner's Manual page 343

Hide thumbs Also See for KONA:

Advertisement

Operating conditions
To operate:
1. Go to the 'User settings → Driver
assistance → Parking safety → Rear
cross-traffic safety' in the LCD display.
The system will turn on and standby to
operate.
2. The system will operate when vehicle
speed is below 10 km/h (7 mph) and
with the shift lever in R (Reverse).
à The system will not operate when
the vehicle speed exceeds 10 km/h
(7 mph). The system will activate
again when the speed is below 8
km/h (5 mph).
The system's detecting range is
approximately 0.5 m ~ 20 m (1 ft ~
65 ft). An approaching vehicle will
be detected if their vehicle speed is
within 8 km/h ~ 36 km/h (5 ~ 22.5
mph).
Note that the detecting range and
operating speed may vary under
certain conditions. As always, use
caution and pay close attention to
your surroundings when backing up
your vehicle.
Warning message and system
control
Rear Cross-Traffic Collision Warning
(RCCW) system
„ Left
OOSH069068L
If the vehicle detected by the sensors
approaches from the rear left/right side
of your vehicle, the warning chime will
sound, the warning light on the outside
rearview mirror will blink and a message
will appear on the LCD display. If the rear
view monitor system is in activation, a
message will also appear on the audio or
AVN screen.
The warning will stop when:
- the detected vehicle moves out of the
sensing area or
- when the vehicle is right behind your
vehicle or
- when the vehicle is not approaching
your vehicle or
- when the other vehicle slows down.
06
„ Right
OOSH069069L
6-67

Hide quick links:

Advertisement

loading