Fca Warning Message And Brake Control - Hyundai KONA Owner's Manual

Driving your vehicle
Prerequisite for activation
FCA gets ready to be activated, when
'Active assist' or 'Warning only' under
Forward Safety is selected in the cluster
LCD display, and when the following
prerequisites are satisfied.
- ESC (Electronic Stability Control) is on.
- Vehicle speed is over 10km/h (6mph).
(The FCA is only activated within a
certain speed range.)
- The system detects a pedestrian,
cyclist (if equipped) or a vehicle in
front, which may collide with your
vehicle. However, FCA may not be
activated or may only sound a warning
alarm depending on the driving or
vehicle conditions.
FCA may not operate properly according
to the frontal situation, the direction of
pedestrian or cyclist (if equipped) and
speed.
WARNING
• To avoid driver distractions, do not
attempt to set or cancel the FCA
while driving the vehicle. Always
completely stop the vehicle at a safe
place before setting or canceling the
system.
• The FCA automatically activates
upon placing the ignition switch
to the ON position. The driver can
deactivate the FCA by canceling the
system setting on the cluster LCD
display.
• The FCA automatically deactivates
upon canceling ESC (Electronic
Stability Control). When ESC is
canceled, FCA cannot be activated
in the LCD display. In this situation,
the FCA warning light will illuminate
which is normal.
6-42
FCA warning message and brake
control
FCA produces warning messages,
warning alarms, and emergency braking
based on the level of risk of a frontal
collision, such as when a vehicle ahead
suddenly brakes, or the system detects
that a collision with a pedestrian or
cyclist (if equipped) is imminent.
Collision warning (First warning)
This warning message appears on the
LCD display with a warning chime.
Additionally, some vehicle system
intervention occurs by the engine
management system to help decelerate
the vehicle.
OOSH069037L