Hyundai KONA Owner's Manual page 403

LEADING VEHICLE DEPARTURE ALERT (IF EQUIPPED)
The Leading Vehicle Departure Alert
system alerts the driver of the departure
of the vehicle in front when the vehicle
is stopped and the Smart Cruise Control
(SCC) system is operating.
System setting and activation
System setting
• Selecting Driver Attention Warning
function
The Leading Vehicle Departure Alert
can be activated from Users Settings
mode in the cluster LCD display by
following the procedure below.
1. Set the ignition switch to the ON
position.
2. Select 'User settings → Driver
assistance → Driving assist →
Leading vehicle departure alert' in
cluster LCD display. Deselect the
setting to turn off the system.
• If the vehicle is turned off then on
again, the system maintains the last
setting.
System standby
Use switch or pedal to accelerate
While the Smart Cruise Control (SCC)
system is operating, your vehicle stops
behind the vehicle in front when it stops.
The message is displayed on the cluster
within 3 seconds after the stop and the
system will be in the standby position.
System activation
Leading vehicle is driving away
If the driver does not take action for a
certain period of time after the vehicle in
front departs, the message is displayed
on the cluster.
The vehicle departs automatically if the
accelerator pedal is depressed or RES+
or SET- toggle switch is pushed up or
down when there is a vehicle in front.
The Smart Cruise Control (SCC) system
is deactivated if the accelerator pedal is
depressed or RES+ or SET- toggle switch
is pushed up or down when there is no
vehicle in front.
WARNING
Always check the front of the vehicle
and road conditions before departure.
OOSH069118L
06
OOSH069127L
6-127