Hyundai KONA Owner's Manual page 397

Warning message
SCC (Smart Cruise Control) disabled.
Radar blocked
When the sensor lens cover is blocked
with dirt, snow, or debris, the Smart
Cruise Control system operation may
stop temporarily. If this occurs, a warning
message will appear on the cluster
LCD display. Remove any dirt, snow, or
debris and clean the radar sensor lens
cover before operating the Smart Cruise
Control system. The Smart Cruise Control
system may not properly activate, if
the radar is totally covered, or if any
substance is not detected after the
vehicle is in the ready (
an open terrain).
Information
For the SCC operation is temporarily
stopped if the radar is blocked, but you
wish to use cruise control mode (speed
control function), you must convert to the
cruise control mode (refer to "To convert
to Cruise Control mode" in the following
page.
NOTICE
• Do not apply license plate frame or
• Always keep the radar sensor and
• Use only a soft cloth to wash the
OOSH069119L
• Be careful not to apply unnecessary
• If the front bumper becomes
) mode (e.g. in
• Use only genuine HYUNDAI parts to
foreign objects such as a bumper
sticker or a bumper guard near the
radar sensor. Doing so may adversely
affect the sensing performance of
the radar.
lens cover clean and free of dirt and
debris.
vehicle. Do not spray pressurized
water directly on the sensor or
sensor cover.
force on the radar sensor or sensor
cover. If the sensor is forcibly
moved out of proper alignment,
the Smart Cruise Control system
may not operate correctly. In this
case, a warning message may not
be displayed. Have the vehicle
inspected by an authorized HYUNDAI
dealer.
damaged in the area around the
radar sensor, the Smart Cruise
Control system may not operate
properly. We recommend you to
have the vehicle inspected by an
authorized HYUNDAI dealer.
repair or replace a damaged sensor
or sensor cover. Do not apply paint to
the sensor cover.
06
6-121