Working With Recipient Block Layouts; Creating A Recipient Block Layout - 3D Histech TMA Grand Master 2.0 User Manual

TMA Grand Master 2.0 – User's Guide
Make sure that the cassettes with the paraffin blocks are properly inserted into the slots.
•
Make sure that the drill bit is of appropriate size and that it is fixed in its position.
•
For more information see section 11 Cassette and Block Dimensions.

5.2 Working with Recipient Block Layouts

5.2.1 Creating a recipient block layout

1. To create a layout, click the arrow or
recipient block image.
Note, that there is a
deleted.
November 5, 2013 – Rev. 1
at the upper section of the Layout button next to the
icon at the bottom of this button, and if you click it the layout will be
3DHISTECH Ltd.
5 Using TMA Grand Master
34(72)