Modifying A Recipient Block Layout; Deleting A Recipient Block Layout; Inserting Recipient Blocks - 3D Histech TMA Grand Master 2.0 User Manual

TMA Grand Master 2.0 – User's Guide

5.2.2 Modifying a recipient block layout

1. Open Layout Editor window by clicking the button next to the recipient block image.
2. To modify a block layout, select the name of the desired layout from the drop-down list, then
click Edit.
3. Follow steps 3-8 in section 5.2.1 Creating a recipient block layout.
4. Click Save.
5. If you do not wish to modify further layouts, Close the window. The specified layout can be
applied to the recipient block by clicking the Use this layout button.

5.2.3 Deleting a recipient block layout

1. Open either the Layout Editor window, or if you wish to delete the layout for the selected block,
click the Delete Layout button next to the block image.
2. Select the layout you want to delete from the drop-down menu and click Delete.
3. If you do not wish to delete further layouts, click Exit to close the window.

5.3 Inserting Recipient Blocks

1. Switch on the TMA Grand Master main unit, the control computer and the monitor, and start
the TMA Grand Master application on the control computer.
2. Insert the virgin blocks into the main unit as explained in section 4.4.3 Inserting a block into
the main unit.
3. In the classic view of the recipient block panel, block thumbnail images are refreshed each time
after you have inserted a block into a slot.
First, click the block thumbnail, then type in a block ID, or add a layout.
November 5, 2013 – Rev. 1 3DHISTECH Ltd.
5 Using TMA Grand Master
37(72)