3D Histech TMA Grand Master 2.0 User Manual page 36

TMA Grand Master 2.0 – User's Guide
9. If you want to create a pattern in which some of the grid positions (column/row intersection)
are not marked as a hole to drill, disable those positions you want TMA Grand Master to skip
during drilling.
•
•
10. When finished creating a layout, click Save.
11. To create an additional layout, click New.
12. If you do not wish to create further layouts, click Exit.
Important!
The table below shows the maximum number of holes can be drilled into a paraffin
block depending on hole sizes:
Paraffin Block Size (mm)
37×24
November 5, 2013 – Rev. 1
Single hole: click the hole that you want to leave out.
Columns, rows, or field selection: while keeping the mouse button pressed, select
the unwanted area on the layout.
Figure 12 – Layout pattern
Hole Sizes (mm)
Ø 0.6
Ø 1.0
Ø 1.5
Ø 2.0
Max. No. of Holes
16×31 = 558
13×22 = 286
9×15 = 135
7×12 = 84
3DHISTECH Ltd.
5 Using TMA Grand Master
Color of Drill Bit
N/A
black
magenta
blue
36(72)