Cassette And Block Dimensions - 3D Histech TMA Grand Master 2.0 User Manual

TMA Grand Master 2.0 – User's Guide

8 Cassette and Block Dimensions

The dimensions of the plastic cassettes suitable for TMA Grand Master are as follows:
29 mm (H) x 41 mm (W) x 6 mm (D)
•
The paraffin blocks can have the following dimensions:
24 mm (H) x 37 mm (W) x 7.5 mm (D)
•
NOTE: If using the 3DHISTECH block moulder, the thickness (depth) of the block is 13.5 mm.
The smaller size (7.5 mm in depth) means the paraffin thickness from the upper edge of the
•
plastic cassette.
The height of paraffin blocks in parentheses means their total depth together with the plastic
•
cassette.
Warning!
Do not use paraffin blocks which dimension values are higher than 24mm (W) x
37mm (H) x 10mm (D), otherwise the drilling and punching heads may be
damaged. If the paraffin blocks are larger than they should be, mold them again
with the base molds delivered with TMA Grand Master.
November 5, 2013 – Rev. 1 3DHISTECH Ltd.
8 Cassette and Block Dimensions
67(72)