Inserting A Block Into The Main Unit - 3D Histech TMA Grand Master 2.0 User Manual

TMA Grand Master 2.0 – User's Guide

4.4.3 Inserting a block into the main unit

1
1. Recipient block positions are displayed in a double-column on the left side of the screen. Tray
positions of donor blocks are identified by six buttons (A-F), tray capacity is 10 blocks each.
2. For the recipient blocks (1) click the
Depending on the donor block tray that you want to rotate to inserting position, click the tray
ID: A – F (2). Alternatively, if the new view is activated, click Insert Block (3) on the Unused
Block(s) panel if you want to insert a new recipient block, and click Insert (4) at the donor
panel to insert new donor block into the donor block tray selected automatically by the
software.
3
November 5, 2013 – Rev. 1
2
button next to the image of the specific block pairs.
4
3DHISTECH Ltd.
4 Operating the Main Unit
27(72)