Cabling - 3D Histech TMA Grand Master 2.0 User Manual

TMA Grand Master 2.0 – User's Guide
6. Grips for service compartment door
7. Front power supply switch
Back View
1. Terminal point for the power supply cord
2. Main power supply switch
3. Fuse compartment
4. USB ports to connect with the computer.

2.2 Cabling

For required cable connections, the supplied cables must be plugged in as shown in the figure above.
To connect the main unit with the computer any of the three USB ports can be used.
Warning!
All cable connections must be checked for firm seating. Defective cables must not be
connected to any part and must be replaced with cables in proper operating condition.
Contact 3DHISTECH support at support@3dhistech.com in such cases.
November 5, 2013 – Rev. 1
Figure 2 – TMA Grand Master back view
3DHISTECH Ltd.
2 TMA Grand Master Hardware
11(72)