Related Manuals for Still RX70 Series
Summary of Contents for Still RX70 Series
- Page 1 Diesel particle filter regeneration: Quick reference guide RX70 The chapter on the particle filter system in the original operating instructions must also be observed RX70-40 RX70-45 RX70-50 7331 7332 7333 7334 7335 57338011801 EN -...
- Page 3 Table of contents Quick reference guide Normal operation ........... . . -1 Low-load operation/EXH.GAS PURIFIER display message .
- Page 5 Quick reference guide Normal operation As a result of its level of utilisation, the temper- ature of the exhaust gas produced by the truck is high enough that the soot particles filtered out of the exhaust gas are burned during operation. The driver must not interfere with this process.
- Page 6 Quick reference guide Performing the parked regeneration NOTE Performing a parked regeneration takes appro- ximately 30 minutes. During this time, the truck cannot be used. – Park the truck in a place that is suitable for parked regeneration. – Apply the parking brake. The parked regener- ation cannot be carried out if the parking brake is not applied.
- Page 7 Quick reference guide Performing the parked regeneration The parked regeneration process is complete if the status bar disappears and REGENERATION COMPLETED appears on the display. The truck is ready for operation again. CAUTION Risk of damage to components! If parked regeneration is not performed when required, the particle filter may become damaged.
- Page 8 Quick reference guide Performing the parked regeneration 57338011801 [EN]...
- Page 10 STILL GmbH Berzeliusstrasse 10 D-22113 Hamburg Ident no. 57338011801 EN...
Need help?
Do you have a question about the RX70 Series and is the answer not in the manual?
Questions and answers