Other Features - Pioneer WYT Inverter Series Installation & User Manual

Operating Instructions
46°F Freeze Protection Function
This feature is meant to be used to prevent
freezing while the user is away from home. When
turned on, it sets the system to keep a temperature
of 46°F. If the unit is in standby, then the setting
will automatically start the heating mode when the
room temperature is equal to or lower than 46°F.
It will set the system back to standby when the
room temperature reaches 48°F.
If the room temperature is ever 64°F or higher,
then the appliance will cancel or prevent this
feature automatically.
MUTE Mode
When the system is muted, the remote controller
will display AUTO fan speed, and the indoor unit
will operate at its lowest fan speed in order to
minimize operation noise.
Press the button in order to activate this
mode. The icon will display to indicate that the
system is muted.
This mode can be cancelled by pressing either the
FAN, TURBO, or SLEEP buttons.
Note: The MUTE feature cannot be activated when the
system is in DRY mode.
Page 18
 
4