Controlling The System's Airflow - Pioneer WYT Inverter Series Installation & User Manual

Operating Instructions
Regarding the Airflow of the Indoor Unit
The air that is pulled in by the fan (the "return air") enters the
grille and is passed through the filter. It is then
cooled/dehumidified/heated through the heat exchanger.
The direction of the air output is manipulated up and down by the
motorized louver, and left to right via manually controlled vertical
deflectors. Some models may come with "dual-swing" capability,
which offers both a horizontal and vertical motorized air flow swing.

Controlling the System's Airflow

1. Pressing the SWING buttons activates the louver.
• Press the button to trigger the horizontal flaps
to swing up and down. Press this button again to
stop swing movement at the current angle.
• Press the button to trigger the vertical flaps to
swing left and right. Press this button again to
stop swing movement at the current angle.
2. If the vertical deflectors (which are located
underneath the flaps) are adjusted manually,
they can be used to fix the airflow in a certain
vertical position before turning the system on.
CAUTION
• Do not manipulate the louvers themselves
manually, or serious damage may occur.
• Deflector adjustments should be made
only when the system is switched off.
• Never poke fingers, sticks, or other
objects into the air inlet/outlet vents.
Page 12
 
Filter
Heat
Flap
Vertical
Movement
Deflectors
4
Fan
Horizontal
Flaps