Pioneer WYT Inverter Series Installation & User Manual page 14

Operating Instructions
DRY Mode
Dry mode is a limited function that can help
reduce the humidity/moisture of the room.
To put the system into dry mode, press the
button until the
appears on the remote's display.
An automatic preset of this mode is then
activated.
FAN-ONLY Mode
Fan-only mode is used to set the system to use
only air ventilation and no heating or cooling.
To put the system into fan-only mode, press
the button until the
appears on the remote's display.
AUTO Mode
Auto mode will let the system determine the
running configuration based on the set
temperature and the current room temperature.
To put the system into AUTO mode, press the
button until the
appears on the remote's display.
Page 14
 
symbol
symbol
symbol
4