Table of Contents
Advertisement
TROUBLESHOOTING GUIDE
PROBLEM
SCRAPER BUILD UP WITH EXCESSIVE
SOIL/RESIDUE
DISC BLADES LOOSE AND/OR
SHEARING CROSS BOLT
LIGHTS DO NOT WORK
WHEEL BEARING FAILURE
6-2
TABLE OF CONTENTS
PROBABLE CAUSE
SCRAPERS SET TOO FAR FROM DISC
BLADE
GANG NOT TIGHTENED PROPERLY
HARNESS OR LAMP CONNECTION
UNPLUGGED
SEALS NOT INSTALLED CORRECTLY
SOLUTION
READJSUT SCRAPERS
RETIGHTEN GANG SHAFTS TO 4,500
FT-LBS.
IF GANGS HAVE RAN LOOSE, GANGS
MAY REQUIRE DISASSEMBLY TO
REMOVE. SOIL TO PROPERLY TORQUE
GANG SHAFTS. REPLACE ANY WORN
COMPONENTS, SHAFTS/SPOOLS, ETC.
CHECK ALL HARNESS/LAMP
CONNECTIONS TO VERIFY THAT
EVERYTHING IS PROPERLY
CONNECTED.
INSTALL SEALS WITH THE LIPS
POINTING OUTWARD AWAY FROM THE
HUB.
INDEX
F-753-0919
Advertisement
Table of Contents
