Nibe F370 Installer Manual page 55

USB SERVICE OUTLET
The display unit is equipped with a USB socket that can
be used to update the software and save logged inform-
ation in F370.
INDOOR CLIMATE
USB
HEAT PUMP
update firmware
logging
manage settings
When a USB memory is connected, a new menu (menu
7) appears in the display.
Menu 7.1 - update firmware
update firmware7.1
start updating
choose another file
This allows you to update the software in F370.
NIBE F370
HOT WATER
INFO
USB 7
NOTE
For the following functions to work the USB
memory must contain files with software for
F370 from NIBE.
The fact box at the top of the display shows information
(always in English) of the most probable update that the
update software has selected form the USB memory.
This information states the product for which the soft-
ware is intended, the software version and general in-
formation about it. If you want a file other than the one
selected, the correct file can be selected through
"choose another file".
start updating
Select "start updating" if you want to start the update.
You are asked whether you really want to update the
software. Respond "yes" to continue or "no" to undo.
If you responded"yes" to the previous question the up-
date starts and you can now follow the progress of the
update on the display. When the update is complete
F370 restarts.
TIP
A software update does not reset the menu
settings in F370.
Caution
If the update is interrupted before it is com-
plete (for example power cut etc.), the soft-
ware can be reset to the previous version if
the OK button is held in during start up until
the green lamp starts to illuminate (takes about
10 seconds).
choose another file
update firmware7.1
Select "choose another file" if you do not want to use
the suggested software. When you scroll through the
files, information about the marked software is shown
in a fact box just as before. When you have selected a
file with the OK button you will return to the previous
page (menu 7.1) where you can choose to start the up-
date.
Chapter 9 | Service 55