LEGRAND Intuity HA7000 User Manual page 9

Intercom Buttons
The "talk" button (white LED) is used to initiate a broadcast style intercom call when held (blinks at a
rate of twice per second when released to listen). If audio (music) was playing, it is muted. The
volume LED's represent the intercom volume when intercom is in use and the audio is off. The
volume +/- buttons will adjust the intercom volume level. When the intercom call is finished, audio is
un-muted after 10 seconds.
The "door" button (white LED) is used to talk to a door when held (blinks at a rate of twice per
second when released for listening). If audio was playing, it is muted. The volume LED's represent
the intercom volume when the door is in use and the audio is off. The volume +/- buttons will adjust
the intercom volume level. When the intercom call is finished, audio is un-muted after 10 seconds.
NOTE: If there are multiple door units in the system, pressing the "door" button will call the
last door unit whose doorbell was rung.
The "mon" button is used to place the intercom into monitor mode when touched (white LED
indicates off / red LED indicates on). This will enable the microphone and allow other intercom units
in the system to listen to the Command Center location. The volume +/- buttons will adjust the
intercom volume level if audio is turned off.
The "crescent moon shaped icon
LED indicates on). This will prevent the Command Center from having an intercom communication
initiated to it from another stations in the home. As well as prevent the station from initiating a
conversation and temporarily disabling the monitor functionality.
Audio Buttons
The "mute" button (white LED indicates Off / red LED indicates On) is used to mute the local audio
when music is being played through the Command Center.
The "volume +/-"white buttons will adjust audio or intercom volume when touched depending on
which is active at the time. The seven white LEDs between the volume +/- buttons will represent
audio or intercom volume level when either is active.
The "power" button (white LED) is a "lock" button. It is used to turn the local audio zone "On or Off".
The LED is "On" when the audio zone is inactive and the LED is "Off" when the audio zone is active.
NOTE: The brightness levels for all of these buttons can be changed in the Digital Audio app.
is the "Do Not Disturb" button (white LED indicates off / red
301 Fulling Mill Road, Suite G
Middletown, PA 17057
6
Page
(800) 223-4162
©Copyright 2016 by Legrand,
Inc All Rights Reserved.
www.legrand.us