2.1.2 Bridge Operation
Each Bridge provides a "Connect" button (used only during provisioning), a recessed "Reset Button"
(used at the direction of Legrand Technical Support to return to factory default condition), and three
status LEDs indicating status of power, WiFi connectivity and system connectivity. All three LEDs should
be on solid white for normal operation.
Status LEDs
301 Fulling Mill Road, Suite G
Middletown, PA 17057
4
Page
(800) 223-4162
Reset button
Connect button
©Copyright 2016 by Legrand,
Inc All Rights Reserved.
www.legrand.us