Maintenance - Black & Decker Dustbuster CS1830 Manual

Fitting the handle to the main chassis
Fitting the handle to the main chassis
Fitting the handle to the main chassis (Fig. D, E)
(Fig. D, E)
(Fig. D, E)
Slide the handle (6) into the main chassis (8) as shown in
u
Slide the handle (6) into the main chassis (8) as shown in
u figure D.
 Slide the handle (6) into the main chassis (8) as shown
figure D.
Secure with retaining screw (17) as shown in figure E.
in figure D.
u
Secure with retaining screw (17) as shown in figure E.
u
 Secure with retaining screw (17) as shown in figure E.
Fitting the Dustbuster
Fitting the Dustbuster
Fitting the Dustbuster
(Fig. F, G, H)
(Fig. F, G, H)
(Fig. F, G, H)
Slide the Dustbuster , nozzle first, into the chassis (8)
®
u
Slide the Dustbuster , nozzle first, into the chassis (8)
®
 Slide the Dustbuster , nozzle first, into the chassis (8) until
®
u until an audible 'click' is heard as shown in figure F.
until an audible 'click' is heard as shown in figure F.
an audible 'click' is heard as shown in figure F.
To release the Dustbuster
u
To release the Dustbuster
 To release the Dustbuster
u
chassis release button (8a) and lift clear.
chassis release button (8a) and lift clear.
chassis release button (8a) and lift clear.
The appliance can now be operated via the on/off button
u
The appliance can now be operated via the on/off button
 The appliance can now be operated via the on/off button (5)
u
(5) on the handle (6) along with the 'BOOST' mode as
(5) on the handle (6) along with the 'BOOST' mode as
on the handle (6) along with the 'BOOST' mode as shown in
shown in figure H. This also allows you to utilise the beater
shown in figure H. This also allows you to utilise the beater
figure H. This also allows you to utilise the beater bars via the
bars via the 'brush on' control (5A).
bars via the 'brush on' control (5A).
'brush on' control (5A).
Removing and clearing the beater bars
Removing and clearing the beater bars
Removing and clearing the beater bars
(Fig. I, J)
(Fig. I, J)
(Fig. I, J)
To remove the beater bar unit (9) from the floor head (10)
u
To remove the beater bar unit (9) from the floor head (10)
 To remove the beater bar unit (9) from the floor head (10)
u
Depress the release button (11) as shown in figure I.
Depress the release button (11) as shown in figure I.
Depress the release button (11) as shown in figure I.
The beater bar (12) can now be removed. The end pieces
u
 The beater bar (12) can now be removed. The end pieces The beater bar (12) can now be removed. The end pieces
u
are also removable allowing you to clear the brushes from
are also removable allowing you to clear the brushes
are also removable allowing you to clear the brushes from
any hair or other debris that may have accumulated (Fig.
from any hair or other debris that may have accumulated
any hair or other debris that may have accumulated (Fig.
J).
(Fig. J).
J).
Charging (Fig. K, L)
Charging (Fig. K, L)
Charging (Fig. K, L)
 Place the appliance into the charging base (7) as shown in Place the appliance into the charging base (7) as shown in
u
Place the appliance into the charging base (7) as shown in
figure K .
u
figure K .
figure K .
 Plug the charging port (7) into an electrical outlet.
Plug the charging port (7) into an electrical outlet.
u
Plug the charging port (7) into an electrical outlet.
 Switch the electrical outlet on. The LED charging indicator
u
Switch the electrical outlet on. The LED charging indicator
u
Switch the electrical outlet on. The LED charging indicator
(B) will illuminate (Fig. L).
u
(B) will Illuminate (Fig. L).
(B) will Illuminate (Fig. L).
Multi LED Display
Multi LED Display
A
A
B
B
C
C
to the Chassis
®
to the Chassis
to the Chassis
®
®
from the chassis press the
®
from the chassis press the
®
from the chassis press the
®
(Original instructions)
(Original instructions)
A. Filter sensor
A. Filter sensor
A. Filter sensor
Whenever a filter is Blocked and needs cleaning, the red
Whenever a filter is Blocked and needs cleaning, the red
Whenever a filter is Blocked and needs cleaning, the red filter LED (A) in the handle will illuminate.
filter LED (A) in the handle will illuminate.
filter LED (A) in the handle will illuminate. Clean fine dust from filter (See section on 'cleaning filters'
Clean fine dust from filter (See section on 'cleaning filters'
Clean fine dust from filter (See section on 'cleaning filters'
in this manual).
in this manual).
in this manual).
B. LED Charging display
B. LED Charging display B. LED Charging display
Battery icon (B) will illuminate when appliance requires
Battery icon (B) will illuminate when appliance requires
Battery icon (B) will illuminate when appliance requires
charging. Led display indicates state of charge (See LED
charging. Led display indicates state of charge (See LED
charging. Led display indicates state of charge (See LED
pattern chart in this manual).
pattern chart in this manual).
pattern chart in this manual).
C. BOOST mode
C. BOOST mode
C. BOOST mode
Illuminates when the appliance is in BOOST mode
Illuminates when the appliance is in BOOST mode allow-
Illuminates when the appliance is in BOOST mode
allowing you to operate at higher power.
ing you to operate at higher power.
allowing you to operate at higher power.
LED Patterns
LED Patterns
Cleaning the filters (Fig. M, N, O, P, Q,
Cleaning the filters (Fig. M, N, O, P, Q, R )
Cleaning the filters (Fig. M, N, O, P, Q,
R )
R )
 Press the dust bowl release button (13) (Fig. M)
Press the dust bowl release button (13) (Fig. M)
 Eject the dust bowl (14) (Fig. N) u
Press the dust bowl release button (13) (Fig. M)
u
Eject the dust bowl (14) (Fig.N)
 Lift the filter assembly (15) from the dust bowl (14) (Fig. O). u
Eject the dust bowl (14) (Fig.N)
u Lift the filter assembly (15) from the dust bowl (14) (Fig.O).
 Empty the dust bowl by lightly shaking over a dustbin
u
Lift the filter assembly (15) from the dust bowl (14) (Fig.O).
u
Empty the dust bowl by lightly shaking over a dustbin
(Fig. P).
u
Empty the dust bowl by lightly shaking over a dustbin
u
 The filter (16) can now be removed from the pre filter (15)
(Fig. P).
(Fig. P).
Figure Q.
Note: The pre filter is impregnated with a fragrance allowing
Note: The pre filter is impregnated with a fragrance allowing
 Empty any remaining dust from the dust bowl.
for a pleasing odour to be released when the appliance is in
for a pleasing odour to be released when the appliance is in
 Rinse out the dust-bowl with warm soapy water.
use.
use.
 Wash the filters with warm soapy water (Fig. R).
The filter (16) can now be removed from the pre filter (15)
u
The filter (16) can now be removed from the pre filter (15)
 Make sure the filters are dry
u
Figure Q.
Figure Q.
 Refit the filters onto the appliance.
Empty any remaining dust from the dust bowl.
u
Empty any remaining dust from the dust bowl.
 Close the dust-bowl. Make sure the release latch (13)
u
Rinse out the dust-bowl with warm soapy water.
u
clicks into place. Rinse out the dust-bowl with warm soapy water.
u
Wash the filters with warm soapy water (Fig. R).
u
Warning! Before performing any maintenance or cleaning on
Wash the filters with warm soapy water (Fig. R).
u Make sure the filters are dry
u
the appliance, unplug the appliance.
Make sure the filters are dry
u
Refit the filters onto the appliance.
u
Refit the filters onto the appliance.
u
Close the dust-bowl. Make sure the release latch (13)
From time to time wipe the appliance with a damp cloth. u
Close the dust-bowl. Make sure the release latch (13)
u clicks into place.
Do not use any abrasive or solvent-based cleaner. Do not
clicks into place.
Warning! Before performing any maintenance or cleaning on
immerse the appliance in water
Warning! Before performing any maintenance or cleaning on
the appliance, unplug the appliance.

Maintenance

the appliance, unplug the appliance.
Your BLACK+DECKER cordless appliance has been designed
From time to time wipe the appliance with a damp cloth.
From time to time wipe the appliance with a damp cloth.
to operate over a long period of time with a minimum of main-
Do not use any abrasive or solvent-based cleaner. Do not
Do not use any abrasive or solvent-based cleaner. Do not
tenance. Continuous satisfactory operation depends upon
immerse the appliance in water
immerse the appliance in water
proper tool care and regular cleaning.
Warning! Before performing any maintenance on cordless
appliances:
 Run the battery down completely if it is integral and then
switch off.
ENGLISH
ENGLISH
ENGLISH
Charging
Charging
Battery Fault
Battery Fault
Charger Fault
Charger Fault
Battery Hot
Battery Hot
9
9
9