Safety Instructions; Warnings - Haskel Q-Drive QGD Series Installation, Operation And Maintenance Manual

Safety Instructions


Use this system in strict accordance with all safety regulations. Follow all applicable national and
regional regulations.

Make sure the environment in which the machinery is to be used is safe for the processed media.

Read and understand the operating instructions in this manual and all safety labels.

A trained person must operate this system. Training includes instruction in operation under both
normal conditions and emergency conditions.

Qualified electrical personnel must perform installation and maintenance. Before opening the
electrical control cabinets, turn off and lock out the main isolating switch. Be aware that live parts
might be present. Replace any removed covers before restarting the system.

Never start service or reach into the system unless the machine is locked AND tagged.

Never change or defeat the function of electric interlocks or other machine shutdown switches.

All protective earth wires must remain connected at all times.

Warnings

WARNING: Conditions that can cause injury.

Never remove the warning tags or labels.

Anyone in the vicinity of the system must wear the personal protection equipment (PPE): safety
glasses, steel-toe shoes, protective/safety gloves, hard hat, and any equipment that is a site
requirement.

For an immediate shutdown, press the E-Stop button on the system.

Use the site lockout procedure for power and start controls.

Qualified electrical personnel must install and maintain the system.

Do not open the Variable Frequency Drive Unit (VFD) until 5 minutes have elapsed after
switching off the machine.

The machinery will fault if the shop air drops below 4bars or exceeds 9.6 bars
Q-Drive Installation, Operation, and Maintenance Manual
1 of 59