Use Of The Keyboard - Pavone Systems MC 315 Series Technical Manual

The unit is set up and controlled via the 21-key keyboard. Set-up menus are usually managed by pressing
the arrow keys to scroll the items and the PRG key to access the relevant sub-menu or programmable
parameter.
ON
The key allows to switch the unit on and off.
KEY
ZERO
TARE
TARE
FUN
+
CLR
FUN
+
SHF
FUN
+
FUN 1
+
FUN
2
+
FUN
3
+
PRG
*) Certain operating functions are performed by pressing the FUN key and an operating key in sequence
(e.g. the TARE key for manual tare set-up) The sequence should be completed within 2 seconds from
pressing the FUN key; during this time, the FUN status LED remains on.
KEY
Page 12

USE OF THE KEYBOARD

FUNCTIONS DURING WEIGHT DISPLAY
Displayed value zeroing (gross weight).
Automated Tare function
Manual Tare function; this function is only accessible when no automated
tare is entered (*).
Tare clear. (*)
Switch displayed weight (net/gross). (*)
Access to set-point value set-up menu (*)
Cell channel switching. (*)
Serial weight transmission via On Demand protocol. In case of metric ope-
ration, weight is saved in the alibi memory; weight and the weighing ID
code are transmitted via the On Demand protocol. (*)
(Hold) Access to set-up menu.
FUNCTION WHEN BROWSING THROUGH THE SET-UP MENU
Selects the next menu.
Selects the previous menu.
Accesses the relevant sub-menu or set-up or confirms the selected parameter.
Exits from the set-up menu or returns to the higher level.