SET-UP MENU
SUBMENU
Load cell data set-up menu with subsequent theoretical calibration of the unit. (*)
Const
(***)
Calibration procedure with sample weights. (*) (***)
CAL Ibr
Measurement parameter set-up procedure. (*)
PArAN
Serial communication port operation parameter set-up menu.
SEriaL
Logical Input/Output mode and parameter set-up menu.
In-Out
Function menu (uploading and downloading of set-up parameters, password set-up
FUnCt
for access to the set-up menu of the unit).
Hardware testing functions of the unit.
tESt
Analogical output set-up (only if the analogical output is configured)(*)
AnALoG
Display of the last 5 authorized staff accesses (**)
ACCESS
Alibi memory consultation (**)
ALi. N EN
(*) The weighing parameters and the calibration functions refer to the cell channel that is enabled
upon accessing the set-up menu of the unit. The enabled cell can be switched over by using the
relevant function key.
(**) These menu items are only displayed in case of METRIC operation.
(***) These menu items are only displayed in case of FREE operation or in case of access of the
authorized staff via password (in case of METRIC operation).
Page 20
NAME