Table of Contents
Advertisement
The DAT 100 transmitter has a front door that protects the 5 digits display, the 2 status LEDs and the
three front keys.
In operating mode the display shows the weight and the LEDs indicate the status of weight (net-gross).
The set-up parameters are easily accessible and can be changed through the use of the three front keys
used to select, edit, confirm and save the new settings.
The instrument is programmed and controlled through the 3 keys keyboard, with the following functions:
KEY
FUNCTIONS IN WEIGHT INDICATION CONDITIONS
Short press: Display switches from Gross to Net weight.
s
Long press: Display switches from Weight to Peak
Short press: Display switches from Numerical to Bar-graph of to gross weight.
u
Long press: Zeroing of the weight/peak displayed.
Short press: Sending the data to the serial line (if the manual protocol was selected)
t
Long press: Set point programming (DAT 100/A)
t u
Pressed at the same time: Accessing the Main Menu
KEY
FUNCTION IN THE MANAGEMENT OF THE SET UP MENU
s
Exits the set up menu or returns to the higher level.
u
Access its submenu, or access the set up or confirms the selected parameter.
t
Goes to the next menu item.
KEY
FUNCTION IN THE MANAGEMENT OF THE SET UP SUBMENU
s
Increases the blinking digit / select the higher value.
Select the next digit. If the flashing digit is the last one, confirm the value and end the set
u
up / selection.
t
Decrease the blinking digit / select the lower value.
FRONT PANEL
DISPLAY
On the 5 digits display the lowest digit indicates the least significant digit.
Normally, the display shows the measured weight. During set-up procedure,
the display shows the sequence of the parameters and theyr values, that allow
the operator to set the instrument.
LED INDICATORS
In the upper part of the display there are two LED indicators:
LED 1 (on = net weight, off = gross weight, flashing = peak)
LED 2 (on = tare entered, off = no tare)
In bar-graph view, both LEDs are flashing.
USING THE KEYBOARD
Page 9
Advertisement
Table of Contents
