Table of Contents
Advertisement
OVERVIEW
All the functions of the MC 315 can be enabled and adjusted by accessing a simple set-up menu, shown
on the following page. All the functions selected or enabled are saved even if the unit is switched off.
The MC 315 is pre-configured with default parameters. The "Default" values of each parameter are
shown on the following pages.
After first field installation, certain parameters need to be adjusted in order to ensure appropriate weight
display (theoretical calibration).
This feature can be requested upon purchasing the MC 315.
The values in the set-up menu can be adjusted using the front keys.
KEY
Selects the next menu.
Selects the previous menu.
Accesses the relevant sub-menu or the set-up or confirmation of the selected
parameter.
Exits the set-up menu or returns to the higher level.
KEY
Selects the higher value.
Selects the lower value.
PRG
Confirms and saves the displayed value.
Exits without saving changes.
KEY
0
9
Writes the selected value (a digit is added on the right).
...
Delete the last digit.
CLR
J
(Hold) Resets set-up.
CLR
Ends entry and saves the value.
PRG
Exits without saving changes.
Page 18
CONFIGURATION
FUNCTION WHILE SETTING UP THE MAIN MENU
FUNCTION WHILE SETTING UP PROPOSED VALUES
FUNCTION WHILE SETTING UP NUMERIC VALUES
Advertisement
Table of Contents
