SMA Solar Technology AG
2. Strip the insulation of the insulated conductors.
3. Connect the cable in accordance with the circuit diagram.
• Remove the connection plug from the base terminal.
• Insert the screwdriver in the square opening of the
connection plug. This will release the opening of the
connection plug for the insulated conductors.
• Insert the insulated conductors of the cable into the connection plug in accordance with the circuit diagram.
• Remove the screwdriver from the connection plug.
• Plug the connection plug into the base terminal.
7.4.2
Connecting the Cable Shield Using a Shield Clamping Saddle
1. Remove the shield clamping saddle from the busbar.
Installation Manual
7 Periodic Actions
SCCP-JP-B1-IA-en-21
51