Configuration; Initial Configuration; Part 1 - Local Configuration - ADDER AdderLink IP User Manual

Configuration

Initial configuration

The initial configuration occurs as two distinct parts:
Part 1 – Local configuration
This part of the configuration takes place using the locally
connected keyboard and video monitor. It allows you to set up
key basic details, network essentials, modem/ISDN parameters
and security key creation.
Part 1 – Local configuration
When you switch on the AdderLink IP unit for the first time it will
take you (using the locally connected keyboard and video monitor)
through a set up sequence consisting of four main screens:
AdderLink IP Unit Config
Hardware Rev 1
Firmware Version 1.4
Keybd Layout UK
Admin Passwd
Unit Name
Hot Keys Ctrl+Alt
Screensaver 10 mins
Time 21 : 27 : 31
Date 15 Apr 2004
Encryption Prefer Off
Save
Unit config screen
Allows you to determine a mixture
of basic and fundamental setup
details such as the keyboard layout,
admin password, time and date.
Controlling the local configuration menus
The local menus use only the keyboard. Use the
keyboard arrow keys to move the green highlight
indicator to the required position. Then, either type the
required information or use the left and right arrows to
change multiple choice items, as appropriate.
Part 2 – Remote configuration
This part of the configuration takes place using a remote connection
(network or dial-up modem/ISDN). It allows fine tuning of the part 1
configuration items plus the creation of multiple user accounts and
host details. Go to
AdderLink IP Network Config
>
MAC Address 00:0F:58:00:00:04
Use DHCP No
IP Address
192.168.42.154
Net Mask 255.255.255.0
Gateway
VNC Port 5900
HTTP Port 80
Save
Network config screen
Requires you to configure the
various key aspects of the IP
network port addressing.
Problems?
The AdderLink IP asks for an unknown admin password
The AdderLink IP does not display the configuration sequence
Part 2 - Remote configuration.
AdderLink IP Modem Config
>
Server IP 192.168.3.1
Client IP 192.168.3.2
Baud Rate 115200
Init String ATZHS0=1
Initialize Port
Restore Defaults
Save
Modem config screen
Allows you to optionally alter the
current settings for the serial port that
is used to connect a modem or ISDN
terminal adapter. The IP addresses are
used to emulate a two-port network
connection and are suitable for most
situations.
>
AdderLink IP Secure Keys
Random data is required to
generate encryption keys
for secure VNC access
Please move the mouse or
press keys until the bar
becomes full
Secure keys screen
This screen uses your mouse
movements or keyboard inputs
to create random data. This
unpredictable information is then
combined with several other
factors to develop the basis of the
encryption keys that are used to
establish secure remote links.
continued
>
11