Table of Contents
Advertisement
To perform the initial local configuration
1 Edit the Unit config screen. The key elements here are:
AdderLink IP Unit Config
Hardware
Rev 1
Firmware
Version 1.4
Keybd Layout
UK
Admin Passwd
Unit Name
Hot Keys
Ctrl+Alt
Screensaver
10 mins
Time
21
:
27
:
Date
15
Apr
Encryption
Prefer Off
When all items are correct, select the Save option to display the next screen.
2 Edit the Network config screen. The key elements here are:
AdderLink IP Network Config
MAC Address
00:0F:58:00:00:04
Use DHCP
No
IP Address
192.168.42.154
Net Mask
255.255.255.0
Gateway
VNC Port
5900
HTTP Port
80
When all items are correct, select the Save option to display the next screen.
Admin password
Enter a password of at least
six characters that has a mix
of letters and numerals. The
background colour provides
an indication of password
suitability and is initially red
to indicate that the password
is not sufficient. When a
password with reasonable
31
strength has been entered it
2004
changes to blue.
Time and Date
Set these correctly as all entries
Save
in the activity log are time
stamped using them.
Encryption
Arrange this setting according
to your security requirements.
See
Encryption settings
a description of the issues and
the settings.
Use DHCP/IP address/Net
Mask/Gateway
You need to either set the
DHCP option to 'Yes' or
manually enter a valid IP
address, Net mask and
Networking
Gateway. See
issues
for more details.
VNC and HTTP ports
These should remain set to
5900 and 80, respectively,
unless they clash with an
existing setup within the
Save
Networking
network. See
issues
for more details.
3 If necessary, edit the Modem config screen.
AdderLink IP Modem Config
Server IP
Client IP
Baud Rate
Init String
When all items are correct, select the Save option to display the next screen.
for
4 Move the mouse and enter changing key sequences within this screen.
AdderLink IP Secure Keys
Random data is required to
generate encryption keys
for secure VNC access
Please move the mouse or
press keys until the bar
becomes full
With every mouse move and keypress, the single dash will move across the
screen (unless the same key is pressed repeatedly). Periodically, a new star
character will be added to the bar as the random data is accepted as part
of the new encryption key. When the bar is full, the final encryption keys
for your AdderLink IP will be created – this process takes roughly 30 to 40
seconds.
The default items here are
perfectly adequate for the
192.168.3.1
majority of modem and ISDN
192.168.3.2
terminal adapter installations.
115200
The Server IP and Client IP
ATZHS0=1
addresses are used to form
an isolated two-device PPP
network connection via the
Initialize Port
dial up link. Their settings are
not related to any other 'real'
Restore Defaults
network settings within the
AdderLink IP.
Save
continued
12
Advertisement
Table of Contents
