Table of Contents
Advertisement
Connections
Installation of the AdderLink IP involves a number of basic
connections to some or all of the following items:
• Host computer or KVM switch
•
Local keyboard, video and mouse
•
IP network port
•
Modem/ISDN port
•
Power input
•
Power control port
ð
Host computer or KVM switch
The AdderView IP can either connect directly to a single host computer or to
range of hosts via one or more KVM switches.
To connect a host computer or KVM switch
1 Ensure that power is disconnected from the AdderLink IP and the computer
or KVM switch to be connected.
(Note: If it is not possible to switch off devices prior to connection, then
a 'Hot plug' procedure is available – see the
restoration
section for more details).
2 Connect the plugs at one end of a KVM cable set to the keyboard, video
and mouse sockets of the computer or KVM switch (for mouse plug
conversion information – see
Monitor (video)
Keyboard
Mouse
5 V
3 Connect the plugs at the other end of the KVM cable set to the corresponding
C O
sockets, collectively labelled as 'COMPUTER/KVM SWITCH', at the rear of the
M 2
P O
2 A
1
C O
W E
2
O N
N T
R
AdderLink IP.
R O
L
K V
M C
O N
S O
L E
Hot plugging and mouse
Appendix
7).
Blue
Purple
or
Mid green
I N D
O O
R U
S E
O N
L Y
C O
M 1
M O
D E
M
C O
M P
U T
E R
/ K
V M
S W
I T C
H
7
Advertisement
Table of Contents
