Easyconfig - Brickcom VD-E400Af Hardware User Manual

F. Select the application and click <Finish>. When launching the PC-NVR program,
please refer to the PC-NVR user manual.

5.4.1 EasyConfig

Users can search cameras by EasyConfig and configure the settings below:

IP address configuration

Live View & Individual Camera Modification
To launch EasyConfig, select "EasyConfig" from the start menu. If Complete Setup type
was used in the software installation, an EasyConfig icon was installed on the desktop.
Double click
If Custom Setup type was used in the software installation but an EasyConfig icon was
not installed on the desktop, by default the program is installed under "C:\Program
Files\Brickcom\EasyConfig".
to launch EasyConfig.
13